Yes, your Clek car seat may touch a car seat installed beside it, as long as the installation is properly tight and the pressure from an adjacent seat is not pressing the seat into a different position or deforming it.
If Liing is installed in a 3 across, it's important to make sure that the area adjacent to Liing is free from obstructions, allowing the carrier to be easily connected to the base
A tight installation means that the seat moves less than 2.5 cm (1") side-to-side or front-to-back when testing for movement where the vehicle belt or UAS (LATCH) belt is passing through the seat.
Comments
0 comments
Article is closed for comments.