Articles in this section

See more

What are the Foonf's LATCH (UAS) and seat belt weight limits?

Avatar
Clek
  • Updated
Follow

 


CAN.png

Rear-Facing
• UAS (LATCH) installation for children weighing 14 – 40 lb
• Vehicle belt installation for children weighing 14 – 40 lb

Forward-Facing
• UAS (LATCH) and vehicle belt installation (used in combination*) for children weighing 22 – 65 lb
• UAS (LATCH) installation for children weighing 22 – 48 lb
• Vehicle belt installation including Top Tether for children weighing
22 – 65 lb
 

NOTE: If the UAS (LATCH) limit listed in your vehicle manual is lower than Clek's stated limit, then it is recommended to follow the limit specified in your vehicle manual.

US.png

Rear-Facing
• LATCH installation for children weighing 14 – 25 lb
• Vehicle belt installation for children weighing 14 – 50 lb

Forward-Facing
• LATCH and vehicle belt installation (used in combination*) for children weighing 22 – 65 lb
• LATCH installation for children weighing 22 – 35 lb
• Vehicle belt installation including Top Tether for children weighing
22 – 65 lb


*NOTE: Clek Foonf has a Rigid LATCH (UAS) design with a separate belt path for forward-facing seatbelt installation. This design means that one method of installation does not interfere with the other. As a result, Clek allows the use of both Rigid LATCH (UAS) and the vehicle seat belt with forward-facing installations ONLY with the Foonf.

Using both Rigid LATCH (UAS) and the vehicle seat belt will allow consumers to continue to benefit from the enhanced side-impact performance of the Rigid LATCH (UAS) system, as well as the increased forward-facing safety performance of our REACT crumple technology, until the child weighs 65 lb, or outgrows the seat in height.

 

Related articles

Comments

0 comments

Article is closed for comments.