Yes, the Liing may be installed in a seating position with Ford Motor Company inflatable belts, but only without the base or with the base installed using LATCH (UAS).
Install Carrier without the Base, using Lap Belt only
When installing the Liing Carrier baseless using a Ford inflatable belt, follow the instructions for a lap-only belt found in your owner's manual (see below):
- After routing the lap portion of the belt through the carrier belt guides, switch the lap portion of the vehicle belt to ALR mode by pulling the lap portion of the webbing all the way out.
- The shoulder portion of the belt MUST be left along the vehicle seat back, and NOT routed behind the Carrier or through the carrier belt guides.
Install the Base using LATCH (UAS) only
If using the base, the Liing base may ONLY be installed using LATCH (UAS). If unable to install the base using LATCH (UAS), move the base to a seating position with non-inflatable belts or install the Liing baseless.