Video Manual: How do I install the Q-tether? Clek July 13, 2020 21:27 Updated Follow Step 1: Lengthen Tether Connector Webbing and Route Tether Step 2: Connect Tether Hook to Vehicle Tether Anchor Step 3: Open Both FF Lock Offs Step 4: Loosen Q-Tether Webbing Step 5: Orient Adjuster to Correct Side for Loading & Unloading and Detach Adjuster Side Loop Step 6: Route Q-Tether Webbing Through Forward Facing Belt Path Step 7: Connect Free End of Q-Tether Webbing to Splitter Plate Step 8: Tighten Tether Connector Strap to Position Splitter Plate Step 9: Tighten Q-Tether Webbing Step 10: Close Both Forward Facing Lock Offs Step 11: Loading & Unloading Related articles Video Manual: How do I load and unload my child when using the Q-tether with my Foonf or Fllo? How do I install and remove my Foonf/Fllo Drink-thingy? Video Manual - Oobr Video Manual (US) - Installing Foonf Rear-Facing What are the differences between Foonf and Fllo? Comments 0 comments Article is closed for comments.