Can I use the UAS (LATCH) anchors that are not designated for the vehicle seating position I have selected for my Foonf convertible car seat?

No. UAS (LATCH) anchors have a required standard spacing of 11 in. (280 mm) from centre point to centre point.

• In rear-facing mode, using the rear-facing UAS belt to connect to lower anchors that are closer together or farther apart than 11 inches will not allow for a secure installation.
• In forward-facing mode, Foonf is designed with a rigid UAS system and will only be able to connect to lower anchors designated for that vehicle seating position.