How do I install my Foonf seat's headrest?

Step 1
Locate the Troubleshooting Tool used to install/remove the Headrest. Remove from storage on Shoulder Harness Access Panel if needed.

Step 2
Use Troubleshooting Tool to install Headrest:

• From back of car seat, place the Headrest support rods into the Headrest Guides on top of seat back.
• Place the metal pin located on the end of the Troubleshooting Tool into the pinhole on the Headrest Guide located on the right side of the seat (when facing the back of the seat).
• While pressing in on Troubleshooting Tool, push Headrest down until Headrest Support Rods slide down into the seat.

Step 3
Press the Headrest Adjuster button located on the left side of the seat (when facing the back of the seat) and push the Headrest down until it locks in to place.

NOTE: A paper clip or other small object may be used if the Troubleshooting Tool is not available.