How do I clean and care for my Infant-thingy insert?

Step 1
If the spot has dried, try lightly brushing or scraping off the residue. Wipe surface with water.

Step 2
If a spot still remains, apply a mild detergent to fabric with a light mist.

Step 3
Work area using soft brush or edge of spoon from outside of spot towards the middle.

Step 4
Allow solution to work for approximately one minute.

Step 5
Remove with clean water or blot with clean soft towel.

Step 6
Repeat steps 3-5 as necessary until spot is removed.

Step 7
Rinse with clear lukewarm water and blot with clean soft cloth as final step.

NOTE: If necessary due to heavy soiling, insert may be removed and hand washed with a mild detergent. Lay insert flat to dry.