How do I install and remove my Oobr Drink-thingy?

To Install Oobr Drink-thingy

Step 1
Remove Seat Cushion from Seat Base and set Seat Cushion to side.

• Pull up on bottom front edge of Seat Cushion to release it from the front of the Seat Base.

Step 2
Locate Cup Holder slots on front corners of Seat Base.

Step 3
Align tabs of Cup Holder to slots in Seat Base.

Step 4
Slide Cup Holder tabs into slots ensuring top and bottom tabs are fully engaged.

Step 5
Install Seat Cushion back onto Seat Base.

To Remove Oobr Drink-thingy

Step 1
Remove Seat Cushion from Seat Base and set Seat Cushion to side.

• Pull up on bottom front edge of Seat Cushion to release it from the front of the Seat Base.

Step 2
Holding onto the outside of the Cup Holder, slide Cup Holder tabs out of slots in Seat Base.

Step 3
Install Seat Cushion back onto Seat Base.

• Place Seat Cushion onto top surface of Seat Base.
• Slide Seat Cushion rearward underneath Seat Back to align snaps in Seat Base.
• Press down on rear and front of Seat Cushion to engage front snaps to Seat Base.