How do I remove and install Oobr's Seat Cushion and Seat Cushion Cover?

Removing Seat Cushion

Step 1
To remove Seat Cushion Cover, you must first remove the entire Seat Cushion from the Seat Base.

Step 2
Pull up on bottom front edge of Seat Cushion to release it from the front of the Seat Base.

Step 3
Pull the Seat Cushion forward to fully release it from the Seat Base.


NOTE: NEVER use booster seat without seat cushion in place.

Removing Seat Cushion Cover

Step 1
Turn Seat Cushion over to locate the Seat Cushion Cover attachments.

Step 2
Using your thumb, push inward on each Seat Cushion Cover attachment one at a time to release the Cover from the Seat Cushion.

Step 3
Remove Seat Cushion Cover from Seat Cushion.

Installing Seat Cushion Cover

Step 1
Place Seat Cushion Cover on a flat surface with Seat Cushion Cover attachments facing up.

Step 2
Place Seat Cushion into Seat Cushion Cover, aligning the seat cushion with the Seat Cushion Cover attachments.

Step 3
Reattach Seat Cushion Cover attachments to Seat Cushion by wrapping the Seat Cushion Cover sides around the entire Seat Cushion.

Installing Seat Cushion

Step 1
Place Seat Cushion onto top surface of Seat Base.

Step 2
Slide Seat Cushion rearward underneath Seat Back to align snaps in Seat Base.

Step 3
Press down on rear and front of Seat Cushion to engage front snaps to Seat Base.