Video Manual: How do I install the Q-tether? – Clek Support

Step 1: Lengthen Tether Connector Webbing and Route Tether

Step 2: Connect Tether Hook to Vehicle Tether Anchor

Step 3: Open Both FF Lock Offs

Step 4: Loosen Q-Tether Webbing

Step 5: Orient Adjuster to Correct Side for Loading & Unloading and Detach Adjuster Side Loop

Step 6: Route Q-Tether Webbing Through Forward Facing Belt Path

Step 7: Connect Free End of Q-Tether Webbing to Splitter Plate

Step 8: Tighten Tether Connector Strap to Position Splitter Plate

Step 9: Tighten Q-Tether Webbing

Step 10: Close Both Forward Facing Lock Offs

Step 11: Loading & Unloading

Related articles