Should the red Rigid LATCH (UAS) Release Handles not function properly, the Troubleshooting Tool found at the back of the seat can be used to manually disengage the LATCH (UAS) connectors.
Step 1
Insert plastic end of tool behind green section of the LATCH (UAS) indicator.
Step 2
Push green section towards back of Foonf until connector snaps open.
Step 3
Pull rigid LATCH (UAS) connector away from the vehicle anchor.
NOTE: If tool is unavailable, a small screwdriver, a key, or a similarly sized rigid item may be used as well.
Comments
0 comments
Article is closed for comments.