Video Manual - Installing Liingo using lap/shoulder belt

Step 1
Position Liingo on vehicle seat with child facing the rear of the vehicle, and rotate Carrier so that the blue Recline Reference Line is parallel with the ground.

Step 2
Route the lap portion of seat belt across the seat and confirm it's under both lap belt guides. Buckle vehicle belt.

Step 3
Wrap the shoulder belt around back of carrier and position it in the shoulder belt guide.

Step 4
Be sure to pull out the shoulder belt all the way to switch the retractor to locking mode.

Step 5
Push the Carrier into the vehicle seat while pulling on the shoulder belt to tighten it.

Step 6
Let any excess seat belt retract back in.

Step 7
Confirm install is tight and the Recline Reference Line is level with ground.

NOTE:
ALWAYS position Carrier so that blue Recline Reference Line on side of Carrier is parallel with the ground.