Should the red Rigid LATCH (UAS) Release Handles not function properly, the Troubleshooting Tool found at the back of the seat can be used to manually disengage the UAS (LATCH) connectors.
Step 1
Insert plastic end of tool behind green section of the UAS indicator.
Step 2
Push green section towards back of Foonf until connector snaps open.
Step 3
Pull rigid UAS connector away from the vehicle anchor.
NOTE: If tool is unavailable, a small screwdriver, a key, or a similarly sized rigid item may be used as well.
Comments
0 comments
Article is closed for comments.